MB6 Split-Mould Clamping Bush, Pin & Fastener Set
€6.20
Bulk pricing available for quantities of 9 units or more
Set of two MB6/MB8 split-mould clamping bushes, one reusable alignment pin and one 30mm socket cap screw with dome nut for accurate and durable bolting together of prepreg split moulds. Available in MB6 (M6) and MB8 (M8) versions.
Size
In stock
1
Buy more, save more
| Quantity | Price per item | Discount |
| 9 items | €6.19 | |
| 49 items | €5.85 | 6% off |
| 50 items | €5.05 | 19% off |
Save this product for later
MB6 Split-Mould Clamping Bush, Pin & Fastener Set
Product Details
This complete split-mould clamping set includes all the required elements to create an accurate and durable clamping point on a prepreg composite split-mould.
As this set includes the reuseable alignment pin, if you already have alignment pins from a previous project then it would be more cost-effective to purchase more MB6/8 mould bushes, and fasteners separately.
For full details on the mould clamping bushes and how to use them, see the MB6/MB8 Split-Mould Clamping Bush product page.
Set Contents
| MB6 (M6/6mm) | MB8 (M8/8mm) |
| 2x MB6 Split-Mould Clamping Bush | 2x MB8 Split-Mould Clamping Bush |
| 1x Reusable Alignment Pin for MB6 | 1x Reusable Alignment Pin for MB8 |
| 1x 30mm M6 Socket Cap Screw | 1x 30mm M8 Socket Cap Screw |
| 1x M6 Dome Nut | 1x M8 Dome Nut |
Reusing the Alignment Pin
The inclusion of a single alignment pin in the set assumes that the mould halves will be made at separate times, allowing the extractable alignment pins to be removed from the first mould and reused to set the mould bushes for the second mould half.
If you prefer to laminate both mould halves at the same time then you will need to purchase an additional alignment pin to go with each clamping bush set.
Specification
General Properties
| Gross Weight | 0.047 | kg |
|---|
Display prices in:EUR